用途及特征USE AND CHARACTER

1、本机适用于大型工厂用成型刀模对地毯、皮革、橡胶、布料等非金属材料进行连续大批量的冲裁作业。

2、输送部分采用PLC控制，由伺服电机驱动物料从机器的一面输入，经模切后，从另一面输出，确保送料精确，运行平稳；并且送料长度可以通过触摸屏方便的调整。

3、主机采用四柱导向，双曲柄平衡，四柱挡死微调机构，液压系统控制，保证了机器的模切速度和精度，所有滑动连接部位采用中央供油自动润滑装置，使磨损降至最低。

4、物料的输入、输出都在输送带上输送，并且物料的模切冲裁也是在输送带上自动完成。

5、采用光电气动纠偏装置，保证了输送带运行位置的精确。

6、机器裁断区域的进料、出料口装有安全光幕，确保了操作者的人身安全。

7、刀模的固定采用气动夹紧装置，更换刀模方便快捷。

8、特殊规格可定制。

1、This machine is applicable for large factories to use blade mould to do continuous and big–quantity cutting for such non-metal materials as carpet, leather, rubber, fabric and so on.

2、PLC is equipped for conveyor system. Servo motor drives materials to come in from one side of the machine; after being cut the materials are delivered from the other side for an accurate material conveying action and a smooth operation. Conveyor length can be easily adjusted by the touch screen.

3、The main machine applies 4-colum direction guiding, double-crank balancing, 4-colum fine-turning gear, and hydraulic system control to guarantee die-cutting speed and precision of the machine. Each sliding linkage site has central oil-supply automatic lubricating device to reduce the abrasion.

4、All input and output actions for materials are done on the conveyor belt. Besides, die-cutting is also automatically finished on the conveyor belt.

5、Photoelectricity and pneumatic correcting device is used to guarantee accurate move sites of conveyor belt.

6、There are safety screen at material feeding and outlet sites of the cutting area to guarantee operator’s safety.

7、Air clamper is equipped for fixing blade mould for an easy and quick mould changing.

技术参数  TECHNICAL SPECIFICATION

型号	Model number	XCLP3-D600	XCLP3-D800	XCLP3-D1000
最大裁断力	Maximum cutting force	600KN	800KN	1000KN
裁断区域	Cutting area	1600×800mm	1600×1000mm	1600×1000mm
上下压板工作行程	The upper and lower plates working stroke	50-185mm	50-185mm	50-185mm
主电机功率	Main motor power	5.5kw	7.5kw	7.5kw
重量	Weight	5000kg	7500kg	8000kg